The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.

AIR LINE CLIPON CHUCK 3/8

Increased performance and yet still meets OSHA regulation 100-1 for 30 psi "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast body. Complete with hang-up hook and 1/4 in NPT female inlet. Inlet pressure of 150 psi.

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.

AIR HOSE RECOIL 25'

Air hose, 1/4 inch by 25 foot, nylon, recoil, 1/4 inch male threaded brass fittings. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree f to 120-degree f. 200 psi. Yellow

Nylon recoil hose retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the jobsite and in garages, plants and service stations. The swivel end fittings reduce hose twist. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow

Made of light, yet rigid tubular design. The large threads can be combined with similar handles made by others. When using handle extensions, always avoid contact with electrical power lines or any electric source. Rental.

Head and handle are fully polished and forged in one-piece with a longer handle for more striking power. Shock reduction grip is molded on for comfort and durability and reduces vibrations caused by impact.

Head and handle are fully polished and forged in one-piece with a longer handle for more striking power. Shock reduction grip is molded on for comfort and durability and reduces vibrations caused by impact.

USF DELUXE CUT/BRAZING GOGGLE

The BL24 bricklayer has a square, flat face with beveled edges, a select hickory handle and the rust-resistant powder coat finish.

Makita Reciprocating Saw with anti-vibration technology for 2x less vibration. Powerful 15.0 amp motor with 0-2,800 strokes per minute. Long 1- 1/4 inches stroke for faster cutting, powerful motor with electronic speed control maintains constant speed under load, variable speed dial for presetting maximum speed, 4-position orbital/straight cutting action, unique clutch assembly helps protect the gears should the blade bind, tool less blade change and shoe adjustment. Specs: 1- 1/4 inches stroke length, strokes/min 0-2,800SPM, 19- 1/8 inches long, weighs 10.0 pounds Includes: (1 each) blade (723054-A, 723066-A), metal tool case.